Creating harmony in the midst of heavy foot or vehicle traffic is very tough, particularly if you own a commercial building. This is often an issue in shopping malls, restaurants, or other crowded places, which explains why certain regulations are necessary for a more organised operation. But aside from these rules, it is additionally important that you give people some visual signs of what these rules are, in the form of stainless-steel bollards so people will be made aware that there are rules to be followed.
Bollards in public areas – Bollards are normally found in public areas, and you can find parking bollards in streets with heavy traffic or facing buildings which need defense against vehicles. Some are even used instead of cycle racks. Others would even allow these bikes to become locked for security purposes.
When bollards are installed, it is actually mainly to reinforce security and safety. They are visual indicators that no unauthorised individual is allowed to enter a place, which can be often signified by adding a chain connecting the bollards. Because of this individuals are banned to get in the location which is cordoned with bollards.
All steel bollards are galvanised to BS EN ISO 1461 and possess the use of powder coating to any BS or RAL colour. Mild steel tube can be found in varying thicknesses 60mm up to 114mm diameter use a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube is available in larger wall thicknesses to supply the best safety barriers.
Of suprisingly low maintenance, steel requires only occasional cleaning with tepid water and soap or perhaps a mild detergent. In heavy industrial areas or parts of a higher volume of traffic bollards may be susceptible to more deposits, in order to maintain the desired finish a far more frequent maintenance programme is recommended.
Areas requiring vehicle access throughout the day and require a safe and secure area at nighttime can utilise a telescopic bollard. The bollards use a light lifting weight, approximately 15kgs, and retract to ground level permitting continued vehicle access. Once the bollard is lifted and locked in place it provides high security to the area, this design can also be manufactured in a thicker steel wall to provide anti ram resistance.
There are various materials used to make bollards. It may be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards can be purchased with extra features, such as being sound sensitive or automated. Fixed bollards have light reflectors to allow people know where they are located, especially the drivers. Without the reflectors, they could easily cause accidents to take place in the streets.
The installation of bollards, whether they are used as a substitute for any bike stand or otherwise, is dependent upon what sort of bollards you may have chosen. Fixed bollards must be installed into concrete or with new foundations. Factors miecfq because the soil condition and design need to be carefully examined in the beginning.
On the other hand, removable or manufactured bollards often come with their mounting systems. Even should they have to be mounted on their own, no drilling is important to set up these kinds of bollards. They don’t have to be glued to the floor either with epoxy or similar materials.
Retractable bollards can also be found. At first, they might seem like layered telescopes which you can use with manual or automatic features, depending on your choice. Manual bollards need to be lifted with the aid of lift-assistance mechanisms while automated bollards use hydraulics and electricity.